Secure checkout with SSL
Free shipping on orders over £250
Same day dispatch Order before 2.30pm
Not sure if its the right part? Call Us
The IFC 50 is a compact UV flame detector, which is specially designed for severe condi-tions often experienced in industrial applications for single flame combustion. The IFC 50 can be connected directly to the ionisation or LDR input of the control box. The UV sensor ensures that the flame detector does not react to background radiation from hot refractory or from any other infrared light source.
The Flame detector has to be disconnected started up once in a day. For safety reasons and technical regulations a controlled burner shut down at least once per 24 hours must be guaranteed.
The flame detector IFC 50 has been developed to meet the requirements of UL 372-2, CSA C22.2 and EN 298. The internal 15 % increase of the UV tube voltage during the start-up phase ensures the safety requirement for the examination of the UV tube to through-ignition. The flame detector IFC 50 has to be switched off for more than 5 seconds before burner operation can be started again.
With the Dioptric holder, which serves also as a connection interface of the flame detector to the combustion chamber, the IFC 50 can be fitted with different glasses and lenses to special requirements. The flame detector is equipped with an optical interface which visibly indicates the flame signal intensity. A simple diagnosis of the flame intensity is directly on the furnace boiler possible.
Please click the link below to download the Technical Manual for this product
IFC50 Product Manual
Apply Here Today