Utile Model U2000 VSD Controlled Gas Booster - 510m3/hr

UtileSKU: UTLU2000-510
filler

Outlet Orientation: L0
Price:
Sale price£8,215.88

Ex VAT


Estimate shipping

Please Note:

If the item is not currently in stock, this shipping indicates the method of shipping used to dispatch once the item has been received into stock.

For accurate lead times, please call us on 0800 368 9771 before placing your order.

Description

Utile Model U2000 510m3/hr Gas Booster VSD (Variable Speed Drive)

Utile Model U2000 single stage centrifugal gas booster. Mounted on a galvanised mild steel base plate and arranged for belt drive by an IP55, safe area, 2 pole motor wound for 415 volts, 3 phase, 50hz.

Supplied in accordance with IGEM/UP/2 requiring connection of the booster with ancillaries and wiring of a 3 phase supply to the control panel.

Bearing Housing: Cast Iron

Volute Casing: Aluminium

Impeller: Welded Stainless Steel

Shaft:Stainless Steel

Seals:Radial Lip Seal & Mechanical Seal

Benefits Of A VSD Driven Gas Booster?

Fixed speed gas booster sets are sized for maximum gas load at maximum pressure differential, but spend the majority of their lives operating at reduced load conditions continually absorbing more power than is necessary. Therefore, it operates at the “back of the performance curve” in turndown condition where the boosted pressure increases, causing higher bearing and gas temperatures, and in some cases surge.

The Utile ‘Smart Drive’ system is designed to sense the variations in gas pressure due to changes in demand and as a consequence adjusts the operating speed to obtain the optimum efficiency and pressure requirement at all times.

The flexibility of the ‘Smart Drive’ system allows it to be used in conjunction with all Utile products in applications where cost and efficiency savings can be achieved. ‘Smart Drive’ operates in single or duty/standby systems, throughout their range of single and multistage gas boosters and positive displacement gas compressors, often reducing the need for costly gas cooling systems.


Performance

Medium Natural Gas S.G. 0.6
Flow Rate 510m3/hr
Inlet Pressure 20 mBar.g
Discharge Pressure 90 mBar.g
Booster Speed 5300rpm
Motor Speed 2850 rpm
Absorbed Power 3.0kW
Rated Motor Power 4.0kW

Model U2000 m3/hr VSD Driven Booster- (Nat Gas SG=0.6)

U2000 510m3hr Gas Booster Flow Rates
Utile Model U2000 510m3hr VSD Controlled Gas Booster

Ancillary Items

  • 1 x 150mm PN16 inlet flexible pipe connector (loose)
  • 1 x 100mm PN16 outlet flexible pipe connector (loose)
  • Set (4) of anti-vibration mounts (loose)
  • IP54 Low gas inlet pressure cut out switch (fitted & wired)
  • 1 x IP54 Utile ‘Smart Drive’ variable speed drive control panel complete with starter, door isolator, emergency stop button, LP switch delay timer, remote stop/start, 24volts contacts for remote signalling, 3 line display with programmable logic and Fieldbus interface (Fitted and wired if required).
  • 1 x Outlet pressure transmitter to maintain a constant outlet pressure (fitted and wired)

Model U2000 510m3/hr Gas Booster (VSD)

The Utile U2000 510m3/hr centrifugal blower, exhauster and gas booster is of a robust construction and has been designed to run under full load conditions handling a wide variety of gases or air. The shaft is sealed to isolate the bearings. Standard machines have a cast iron bearing housing with an aluminium volute and impeller.

Utile U2000 510m3/hr boosters can be supplied as a basic unit with baseplate and motor on request, as standard we supply them as a package with pressure switches and control panel wired and fitted to comply with IGEM/UP/2. If you require a duplex set with one unit on standby. please contact us.


Compliance:

  • IGEM/UP/2
  • ATEX Directive: 2014 / 34 / EU
  • Machinery Directive: 2006 / 42 / EC
  • BSEN 8487: 2007

Dimensions

Utile U2000 510m3/hr VSD Gas Booster

For this model of Gas Booster and Outlet Orientation must be selected:

Select the correct orientation for your application from the drop down options above.


Utile U2000 510m3/hr VSD Gas Booster

Gas Booster Lead Times and Shipping Charges

Due to the fact that these Boosters are made to suit specific applications and are made here in the UK, the lead time for them is 4-6 weeks as standard. If you require a booster urgently, please contact us and we will enquire wether your order can be expedited. Standard UK Shipping for all Gas Boosters is £104.00 Net to include packaging and delivery to a UK address.


Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

People also purchased...

Recently viewed