Utile Model 876A VSD Controlled Gas Booster - 510m3/hr
Utile SKU: UTL876A-VSD
Utile Model 876A single stage centrifugal gas booster. Mounted on a galvanised mild steel base plate and arranged for belt drive by an IP55, safe area, 2 pole motor wound for 415 volts, 3 phase, 50hz.
Supplied in accordance with IGEM/UP/2 requiring connection of the booster with ancillaries and wiring of a 3 phase supply to the control panel.
Fixed speed gas booster sets are sized for maximum gas load at maximum pressure differential, but spend the majority of their lives operating at reduced load conditions continually absorbing more power than is necessary. Therefore, it operates at the “back of the performance curve” in turndown condition where the boosted pressure increases, causing higher bearing and gas temperatures, and in some cases surge.
The Utile ‘Smart Drive’ system is designed to sense the variations in gas pressure due to changes in demand and as a consequence adjusts the operating speed to obtain the optimum efficiency and pressure requirement at all times.
The flexibility of the ‘Smart Drive’ system allows it to be used in conjunction with all Utile products in applications where cost and efficiency savings can be achieved. ‘Smart Drive’ operates in single or duty/standby systems, throughout their range of single and multistage gas boosters and positive displacement gas compressors, often reducing the need for costly gas cooling systems.
|Medium||Natural Gas S.G. 0.6|
|Inlet Pressure||20 mBar.g|
|Discharge Pressure||75 mBar.g|
|Booster Speed||8750 rpm|
|Motor Speed||2850 rpm|
|Rated Motor Power||3.0kW|
The Utile 876A centrifugal blower, exhauster and gas booster is of a robust construction and has been designed to run under full load conditions handling a wide variety of gases or air. The shaft is sealed to isolate the bearings. Standard machines have a cast iron bearing housing with an aluminium volute and impeller.
Model 876A boosters can be supplied as a basic unit with baseplate and motor on request, as standard we supply them as a package with pressure switches and control panel wired and fitted to comply with IGEM/UP/2. If you require a duplex set with one unit on standby. please contact us.
Due to the fact that these Boosters are made to suit specific applications and are made here in the UK, the lead time for them is 4-6 weeks as standard. If you require a booster urgently, please contact us and we will enquire wether your order can be expedited. Standard UK Shipping for all Gas Boosters is £104.00 Net to include packaging and delivery to a UK address.