Skip to content

Suntec TA4A 4010 7

by Suntec
Original price £1,032.31 - Original price £1,032.31
Original price
£1,032.31 - £1,032.31
Current price £1,032.31
SKU PHP54073

Rotation: Clockwise
Hub: 54mm
Pressure Range: 7-40 bars
Shaft Diameter: 12mm


The SUNTEC TA oil pump is specially designed for industrial heating applications using light or heavy oils. It is fitted with a preheater location to render cold starting easier.



- Heavy oil, light oil, B10 heating oil/biofuel blend (as defined in DIN V51603-6) and kerosene
- One or two-pipe system



The gear set draws oil from the tank and transfers it to the valve regulating the oil pressure to the nozzle line. All oil which does not go through the nozzle line will be dumped through the valve back to the return line in two pipe installation or, if it is a one-pipe installation, back to the gear-set.



Care should be taken to avoid starting pump with high viscosity cold oil leading to pump and coupling damage. For this reason, the TA pump body includes a cavity to accept an electric preheater. This cavity has been located to give maximum heat transfer from the heater to the oil in the pump without direct contact between the heater cartridge and the oil.

Heaters should be connected for a period of time prior to starting the pump. When the right temperature is reached, they can be switched off or left permanently switched on to maintain fluid oil in the pump during the periodic burner shut-downs. The oil supply, pipes and filters must be separately heated.



The plug of the pressure gauge port must be loosened until the air is evacuated from the system.

Suntec TA4A 4010 7 Technical Datasheet

Suntec TA4A 4010 7 Exploded View