Skip to content

Honeywell DKG 972 MOD 05 230v 0432005U Burner Control Box

Honeywell DKG 972 MOD 05 230V Burner Control Box


The burner control box DKG 972 controls and supervises atmospheric burners for gas. They are approved and certified according to the applicable European standards and regulations.

The microprocessor-based programming sequence ensures extremely stable timings independent of voltage variations, ambient temperature and/or switch-on cycles. The built-in information system not only provides a continuous monitoring of the actual state of the box (very helpful especially for monitoring the start-up phase) but also informs about the cause of a possible lock out. The lock out cause is stored in such a way that it can be retrieved even after a power failure.

Honeywell 0432005U Control Box

DKG972 Specifications

The control box is designed for maximum safety in case of fluctuations in the voltage supply. If the mains voltage drops below the permitted level, operation is interrupted and the control box automatically prevents the start sequence from being repeated. In this way, the safety of the system is not put at risk by a drop in the mains voltage. This low-voltage protection works not only during start-up but also permanently during operation.


  • Operating Voltage: 220/240V
  • Sensitivity: 1 µA
  • Ionisation probe.
  • Infrared flicker detector IRD 1020.1
  • UV flame sensor UVD 971
  • IP Rating: IP40
  • Temperature: -20° C - +60° C


Control Boxes Height Width Depth
DKG 972 Mod 05 86mm 60mm 62.5mm
DKG 972 Mod 10 86mm 60mm 62.5mm

Product Bundles