Skip to content
Buy Now Pay Later with Klarna
Buy Now Pay Later with Klarna

Suntec T Series Pumps

For more info, please scroll to the bottom of the page.

Filters

  • Suntec T4A 10 6-Fuel Pump

    Suntec T4A 10 6

    Suntec
    £1,256.63

    Rotation: Clockwise Hub: 70mm Shaft Diameter: 20mm Pre Heater Facility Yes   The SUNTEC T oil pump is specially designed for industrial heating ...

    View full details
  • Suntec T3C 10 6-Fuel Pump

    Suntec T3C 10 6

    Suntec
    £632.99

    Rotation: Anti Clockwise Hub: 70mm Shaft Diameter: 20mm Pre Heater Facility Yes   The SUNTEC T oil pump is specially designed for industrial hea...

    View full details
  • Suntec T2C 10 6-Fuel Pump

    Suntec T2C 10 6

    Suntec
    £1,169.57

    Rotation: Anti Clockwise Hub: 70mm Shaft Diameter: 20mm Pre Heater Facility Yes   The SUNTEC T oil pump is specially designed for industrial hea...

    View full details
  • Suntec T4C 10 7 Oil Pump - Fuel Pump

    Suntec T4C 10 7 Oil Pump

    Suntec
    £957.00

    Suntec T4C 107 Oil Pump - 20mm shaft The SUNTEC T oil pump is specially designed for industrial heating applications using light or heavy oils wi...

    View full details

Suntec T Series Pumps

The Suntec T series pumps are very similar to the TA pumps but designed for use in industrial applications with high capacity demands. Designed for use with B10 heating oil/biofuel, Light Oil, Heavy Oil and Kerosene in conjunction with single or dual pipe setups.

A SUNTEC TV valve is recommended when using this pump.

Pre-Heating Function

Care should be taken to avoid starting pump with high viscosity cold oil leading to pump and coupling damage. For this reason, the TA pump body includes a cavity to accept an electric preheater. This cavity has been located to give maximum heat transfer from the heater to the oil in the pump without direct contact between the heater cartridge and the oil.

Heaters should be connected for a period of time prior to starting the pump. When the right temperature is reached, they can be switched off or left permanently switched on to maintain fluid oil in the pump during the periodic burner shut-downs.

The oil supply, pipes and filters must be separately heated.

Rotation

Rotation of these pumps is determined by viewing the pump from the shaft end.


SUNTEC T Series Pump
SUNTEC T Series Pump Dimensions