Ecoflam Burners

Burners for Every Job

The Ecoflam range cover all types of heating application. Wall hung domestic boiler? Ecoflam have a burner for that. High output floor standing boiler? Ecoflam have a burner for that too. Industrial hot water boiler? I think you know what we are about to say... yes the Ecoflam range is comprehensive, with burners to suit every application.

We also offer the full range of Ecoflam Parts for all burners. If you cannot see the part required, you can contact us and we will get a qoute sent over to you quickly.

Ecoflam Max Gas

Gas Burner From 17kW to 500kW

- High efficiency fan ventilation system (HPV) allowing easy matching with boilers having high combustion chamber pressure

- Combustion head easy to assemble and adjust for fine set up

- Separate gas train (available for different inlet gas pressure) easy to assemble into the burner

- The hinge flange allows accessibility to burner head without losing burner settings

- New control box Thermowatt allowing to improve the interface with service personnel. The digital display (PAB versions) featuring the interactive language with pictograms gives real time information about burner operation and statistics stored during the heating season

See Max Gas Burners Here

Ecoflam BLU

Gas Burner From 270kW to 17,000kW

- High versatility on different types of domestic, commercial and industrial application

- Aluminium casing up to BLU 2000.1 and steel casing from 3000.1 with electrical panel IP40 on board

- Adjustable combustion head for fine-tune regulation and matching with different combustion chamber

- Modulating version with PID system controller with digital set point display and real time value

- DUOBLOCK and ELECTRONIC versions are available on request for selected output to match main boilers and industry applications

Ecoflam MultiCalor

Dual Fuel Burner from 120kW to 25,000kW

Aluminium casing up to MULTICALOR 200.1 and steel casing from 300.1 with electrical panel integrated on board

Progressive version with electrical servomotor and double adjustable mechanical cam that allows air gas/light oil fine tuning

Two stages version with electric servomotor and integrated system for the regulation of air gas and light oil with two nozzles from MULTICALOR 45 to MULTICALOR 200.1

Progressive modulating nozzle with flow and return. Shut down flow system on the nozzle managed by coil from MULTICALOR 700.1

Standard version running on manual fuel selection mode and on request automatic fuel changeover. The automatic change over system can be triggered by gas pressure or by a timer

Ecoflam MultiFam

Dual Fuel Burner from 400kW to 25,000kW

- Two stages version with electric servomotor and integrated system for the regulation of air gas and heavy oil with two nozzles for MULTIFLAM 200.1

- Progressive version with electrical servomotor and double adjustable mechanical cam that allows air gas/heavy oil fine tuning

- Progressive modulating nozzle with flow and return. Shut down flow system on the nozzle managed by coil from MULTIFLAM 700.1

- Digital thermo regulator “GEFRAN” integrated on the front panel for granting the temperature stability of the oil fuel from MULTIFLAM 300.1

- DUOBLOCK and ELECTRONIC versions are available on request for selected output to match main boilers and industry application

Ecoflam Max

Light Oil Burners from 17kW to 546kW

- New high efficiency fan ventilation system (HPV) allowing easy matching with boilers having high combustion chamber back pressure

- Electrical wiring simple to disassemble for easy maintenance

- Air damper with progressive micrometric air regulation adjustable in three positions

- Low NOx version class 3 with yellow flame developed by Ecoflam Bruciatori S.p.A.

- Selected models are available in HT version and with “D” pump for light oil with viscosity up to 200 cTs

See Max (Oil) Burners Here

Ecoflam Maior

Light Oil Burner from 415kW to 17,000 kW

- All burners feature high versatility on different types of domestic, commercial and industrial application

- Two stages with hydraulic or electric servomotor up to MAIOR P 400.1

- Progressive mechanical version with flow return nozzle. Shut down flow system on the nozzle managed by coil from MAIOR P 700.1

- Modulating version with PID system controller with digital set point display and real time value

Ecoflam Minor

Oil and Gas burner from 20kW to 30kW

- Adjustable flange

- Balanced and conventional flue as standard

- Quiet, clean and smooth running

- Standard industrial components

- 30 years of proven reliability

Ecoflam TS Range

Duoblock Burners from 350kW to 25,000kW

- ECOFLAM Duoblock burners (“TS”= Separate Head) have been developed to complete its offer for commercial and industrial combustion solutions

- Duoblock burners can run with preheated combustion air and save a considerable amount of energy that can be recovered from the hot flues gases by using a heat exchanger in the flue gas system (maximum air temperature 200°C)

- Burners can be supplied in mechanical progressive modulating operation with PID controller or with electronic compound regulation (BMS) that support also inverter system for speed control and O2 Trim control

- Duoblock burners are suitable for all types of installation and can utilize existing ventilators and overcome high resistance in the heat exchanger or combustion chamber or simply fulfil customers request or industrial application requirements

Ecoflam Maxflam Range

Heavy Oil Burners from 68kW to 25,000kW

- MAXFLAM and OILFLAM range work with heavy oil up to 50°E at 50°C with On/Off switch to exclude the circuit heaters in order to operate also with low viscosity heavy oil

- All burners feature high versatility on different types of domestic, commercial and industrial application

- Two stages version available with electric servomotor with two nozzles from MAXFLAM 30 up to OILFLAM 400.1

- Progressive or modulating nozzle with flow return. Shut down flow system on the nozzle controlled by coil from OILFLAM 300.1

Ecoflam Oilflam Range

Heavy Oil Burners from 68kW to 17,000kW

- OILFLAM range work with heavy oil up to 50°E at 50°C with On/Off switch to exclude the circuit heaters in order to operate also with low viscosity heavy oil

- Two stages version available with electric servomotor with two nozzles up to OILFLAM 400.1

- DUOBLOCK and ELECTRONIC versions are available on request for selected output to match main boilers and industry applications

- M100 configuration for heavy oil up to 100°E at 50°C is available on request

Ecoflam Burner Quote

Looking for one of the Ecoflam burners above but we dont have it available to buy on the shop? Thats usually because its far more customisable and we need a lot mnore information about the application. If this is the case, please either call us on 01905 773377 or email sales@powerheatingplants.com and we will get you a quote quickly.